Freshly Printed - allow 7 days lead
Couldn't load pickup availability
Reactions and Mechanisms in Thermal Analysis of Advanced Materials
Atul Tiwari (Edited by), A Tiwari (Author), Baldev Raj (Edited by)
9781119117575, Wiley
Hardback, published 11 September 2015
616 pages
25.4 x 17.5 x 3.6 cm, 1.179 kg
Strong bonds form stronger materials. For this reason, the investigation on thermal degradation of materials is a significantly important area in research and development activities. The analysis of thermal stability can be used to assess the behavior of materials in the aggressive environmental conditions, which in turn provides valuable information about the service life span of the materiel. Unlike other books published so far that have focused on either the fundamentals of thermal analysis or the degradation pattern of the materials, this book is specifically on the mechanism of degradation of materials. The mechanism of rapturing of chemical bonds as a result of exposure to high-temperature environment is difficult to study and resulting mechanistic pathway hard to establish. Limited information is available on this subject in the published literatures and difficult to excavate. Chapters in this book are contributed by the experts working on thermal degradation and analysis of the wide variety of advanced and traditional materials. Each chapter discusses the material, its possible application, behavior of chemical entities when exposed to high-temperature environment and mode and the mechanistic route of its decomposition. Such information is crucial while selecting the chemical ingredients during the synthesis or development of new materials technology.
Preface xv Part 1: Degradation of Polymers 1 Thermal Stability of Organic Monolayers Covalently Grafted on Silicon Surfaces 3 1.1 Introduction 3 2 Thermal Analysis to Discriminate the Stability of Biomedical Ultrahigh-Molecular-Weight Polyethylenes Formulations 39 2.1 Introduction 39 3 Materials Obtained by Solid-State Thermal Decomposition of Coordination Compounds and Metal–Organic Coordination Polymers 63 3.1 Introduction 63 4 Methods for Limiting the Flammability of High-Density Polyethylene with Magnesium Hydroxide 85 4.1 Introduction 85 5 Thermal Analysis in the Study of Polymer (Bio)-degradation 103 5.1 Introduction 103 6 Thermal and Oxidative Degradation Behavior of Polymers and Nanocomposites 127 6.1 Introduction 127 7 Thermal Degradation Effects on Polyurethanes and Their Nanocomposites 165 7.1 Introduction 165 8 Controllable Thermal Degradation of Thermosetting Epoxy Resins 191 8.1 Introduction 191 9 Mechanism of Thermal Degradation of Vinylidene Chloride Barrier Polymers 209 9.1 Introduction 209 10 Role of Mass Spectrometry in the Elucidation of Thermal Degradation Mechanisms in Polymeric Materials 221 10.1 Introduction 221 11 The Mechanism of Poly(styrene) Degradation 259 11.1 Introduction 259 12 The Use of Thermal Volatilization Analysis of Polylactic Acid and Its Blends with Starch 269 12.1 Introduction 269 Part 2: Degradation of Other Materials 13 Reaction Mechanisms in Thermal Analysis of Amazon Oilseeds 287 13.1 Introduction 287 13.2 Oxidative Stability 297 14 Thermal Degradation of Cellulose and Cellulosic Substrates 301 14.1 Introduction 301 15 Thermal Decomposition Behavior of Sodium Alkoxides of Relevance to Fast Reactor Technology 333 15.1 Introduction 333 16 Thermal Degradation and Morphological Characteristics of Bone Products 393 16.1 Introduction and Objectives 393 17 Processes and Mechanisms in Hydrothermal Degradation of Waste Electric and Electronic Equipment 411 17.1 Introduction 411 18 Heat Transfer Mechanism and Thermomechanical Analysis of Masonry Structures (Mortars and Bricks) Subjected to High Temperatures 437 18.1 Introduction: State of the Art 437 19 Application of Vibrational Spectroscopy to Elucidate Protein Conformational Changes Promoted by Thermal Treatment in Muscle-Based Food 467 19.1 Introduction 467 20 Thermal Activation of Layered Hydroxide-Based Catalysts 483 20.1 Introduction 483 21 Thermal Decomposition of Natural Fibers: Kinetics and Degradation Mechanisms 515 21.1 Introduction 515 22 On the Kinetic Mechanism of Non-isothermal Degradation of Solids 547 22.1 Introduction 547 Acknowledgments 575
Florent Yang, Philippe Allongue, Francois Ozanam and Jean-Noel Chazalviel
1.2 Alkyl-Grafted Surfaces 8
1.3 Alkoxy-Grafted Surfaces 15
1.4 Surfaces Grafted with Aryl Groups 19
1.5 Surfaces Grafted via Si–N Linkages 22
1.6 Summary 27
Maria Jose Martinez-Morlanes and Francisco Javier Medel
2.2 Suitability of TGA Analysis for the Study of Stability of Medical Polyethylene 42
2.3 Activation Energies of Degradation Processes in the Thermal Decomposition of UHMWPE 56
Oana Carp
3.2 Coordination Compounds and Metal–Organic Coordination Polymers as Precursors of Oxides 65
3.3 Coordination Compounds and Metal–Organic Coordination Polymers as Precursors of Sulfides 72
3.4 Coordination Compounds as Precursors of Composites 74
3.5 Coordination Compounds and Metal–Organic Coordination Polymers as Precursors of New Complexes 74
3.6 Coordination Compounds and Metal–Organic Coordination Polymers as Precursor of Metals 75
3.7 Coordination Compounds as Precursor of Nitrides 76
3.8 Other Materials 77
3.9 Conclusions 77
Joanna Lenża, Maria Sozańska and Henryk Rydarowski
4.2 Experimental Part 88
4.3 Results and Discussion 91
4.4 Conclusions 99
Joanna Rydz, Marta Musioł and Henryk Janeczek
5.2 Differential Scanning Calorimetry 105
5.3 Dynamic Mechanical Analysis 112
5.4 Thermogravimetric Analysis 115
5.5 Conclusions 120
Gauri Ramasubramanian and Samy Madbouly
6.2 Thermal Degradation 131
6.3 Chemical and Oxidative Degradation 137
6.4 Photo-oxidation 143
6.5 Environmental and Biological Degradation 148
6.6 Degradation of Polymer Nanocomposites 154
6.7 Conclusions 162
Ivan Navarro-Baena, Marina P. Arrieta, Alicia Mujica-Garcia, Valentina Sessini, Jose M. Kenny and Laura Peponi
7.2 Main Techniques Used for Studying the Thermal Degradation Process 167
7.3 Degradation Mechanisms 169
7.4 Chemical Approaches Used to Improve the Thermal Stability of PU 171
7.5 Thermal Degradation of PU Based on Natural Sources 172
7.6 Nanocomposites 174
7.7 PU Electrospun Fibers 181
7.8 Conclusions 184
Zhonggang Wang
8.2 Ester-, Carbamate-, and Carbonate-Linked Reworkable Epoxy Resins 193
8.3 Ether-Linked Reworkable Epoxy Resins 195
8.4 Phosphate- and Phosphite-Linked Reworkable Epoxy Resins 196
8.5 Sulfite-Linked Reworkable Epoxy Resins 204
Bob A. Howell
9.2 Discussion 210
9.3 Conclusions 218
Paola Rizzarelli and Sabrina Carroccio
10.2 Thermogravimetry-Mass Spectrometry (TG-MS) 224
10.3 Gas Chromatography-Mass Spectrometry (GC-MS) and Pyrolysis-Gas Chromatography/Mass Spectrometry (Py-GC/MS) 228
10.4 Direct Pyrolysis Mass Spectrometry (DPMS) 237
10.5 Matrix-Assisted Laser Desorption Ionisation Mass Spectrometry (MALDI MS) 242
10.6 Other Mass Spectrometric Techniques 246
10.7 Conclusions 249
Bob A. Howell
11.2 Discussion 260
11.3 Conclusions 266
Derval dos Santos Rosa, Claudio Roberto Passatore, and Jose Ricardo Nunes de Macedo
12.2 Use of TVA 271
12.3 TVA as an Analytic Technique 272
12.4 TVA-PLA Investigation 274
12.5 TVA – Thermoplastic Starch 276
12.6 Analyses of TVA – PLA and Their Mixtures with Thermoplastic Starch 280
12.7 Conclusions 282
Orquidea Vasconcelos dos Santos, Carlos Emmerson and Suzana Caetano da Silva Lannes
Jenny Alongi and Giulio Malucelli
14.2 Thermal and Thermo-oxidative Degradation of Cellulose 302
14.3 Factors Affecting Cellulose Thermal Degradation: Charring/Volatilisation Competition 318
14.4 Conclusions 329
K. Chandran, M. Kamruddin, S. Anthonysamy and V. Ganesan
15.2 Preparation of Sodium Alkoxides 334
15.3 Characterization of Sodium Alkoxides 339
15.4 Thermal Decomposition of Sodium Alkoxides 348
15.5 Kinetic Analysis 364
F. Miculescu, A. Maidaniuc, G.E. Stan, M. Miculescu, S.I. Voicu, L.T.Ciocan
16.2 Short Overview on the Thermal Analysis Experimental Methods 396
16.3 Morpho-structural Changes Induced by the Thermal Treatments Applied to Hard Tissues. Bone Degradation Mechanism 400
16.4 Conclusions 408
Yu Luling, He Wenzhi and Li Guangming
17.2 Application of Hydrothermal Degradation in Treatment of WEEE 414
17.3 Mechanism of Hydrothermal Degradation for Treatment of WEEE 418
17.4 Conclusion 431
M.E. Macia Torregrosa and J. Camacho Diez
18.2 Heat Transfer Mechanisms through a Masonry Element under Load 442
18.3 Influence of High Temperatures on the Structural Behavior of a Masonry Element 444
18.4 Factors Involved in the Behavior of the Masonry Subjected to High Temperatures 444
18.5 Properties of the Ceramic Pieces 449
18.6 Properties of the Mortar 456
A.M. Herrero, P. Carmona, F. Jimenez-Colmenero and C. Ruiz-Capillas
19.2 Protein Structure 468
19.3 Muscle-Based Food Proteins: Thermal treatment 468
19.4 Vibrational Spectroscopic Methods and Protein Structure 469
19.5 Vibrational Spectroscopy to Elucidate Structural Changes Induced by Thermal Treatment in Muscle Foods
473
19.6 Conclusions 479
Milica Hadnadjev-Kostic, Tatjana Vulic and Radmila Marinkovic-Neducin
20.2 LDH General Properties 484
20.3 Thermal Activation of LDH-Based Catalysts – Thermal Decomposition Pathway from LDH to Mixed Oxides
490
20.4 Properties of Thermally Activated LDHs 495
20.5 Application of LDH-Based Materials 501
20.6 Synthesis Methods of Ti-Containing LDH-Based Materials 502
20.7 Synthesis Methods for the Association of TiO2 and LDH-Based Catalysts 502
20.8 Conclusions and Perspectives 509
Matheus Poletto, Heitor L. Ornaghi Junior and Ademir J. Zattera
21.2 Theoretical Background 516
21.3 Chemical Composition of the Natural Fibers 522
21.4 XRD Analysis Applied to Natural Fibers 524
21.5 Thermogravimetric Analysis of Natural Fibers 527
21.6 Kinetic Degradation and Reaction Mechanisms in the Solid State of Natural Fibers 532
21.7 Conclusion 541
Lyubomir T. Vlaev, Velyana G. Georgieva, and Mariana P. Tavlieva
22.2 Mathematical Background in the Thermogravimetry 549
22.3 Kinetic Mechanism of the Thermal Degradation of CaC2O4・H2O 561
22.4 Kinetic Mechanism of the Thermal Degradation of Chitin 567
22.5 Kinetic Mechanism of the Thermal Degradation of Rice Husks 571
22.6 Conclusions 574
References 575
Index 579
Subject Areas: Mechanical engineering & materials [TG]
