Freshly Printed - allow 7 days lead
Couldn't load pickup availability
Mechanical Properties and Performance of Engineering Ceramics and Composites VI, Volume 32, Issue 2
Dileep Singh (Edited by), D Singh (Author), Jonathan Salem (Edited by), Sujanto Widjaja (Volume editor)
9781118059876, Wiley
Hardback, published 18 November 2011
328 pages
24.1 x 16.3 x 2 cm, 0.585 kg
This book is a collection of papers from The American Ceramic Society's 35th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 23-28, 2011. This issue includes papers presented in the Mechanical Behavior and Performance of Ceramics & Composites Symposium on topics such as processing-microstructure properties correlations; fracture mechanics, modeling and testing; tribological properties; applications; and processing.
Preface ix Introduction xi COMPOSITES: FIBERS, MATRICES, INTERFACES, AND APPLICATIONS Oxide Fiber Coatings for Silicon Carbide Ceramic Matrix Composites 3 Transmission Electron Microscopy of Rare-Earth Orthophosphate Fiber-Matrix Interphases that Deform by Transformation Plasticity During Fiber Push-Out 15 Processing of Oxide/Oxide Composites for Gas Turbine Applications Based on Braiding Technique (OXITEX) 23 ENVIRONMENTAL EFFECTS OF CERAMICS AND COMPOSITES Relationships Between Fiber Strength, Passive Oxidation and Scale Crystallization Kinetics of Hi-Nicalon-S SiC Fibers 39 FRACTURE MECHANICS, MODELING, AND MECHANICAL TESTING Specimen Stress Equilibrium in Split Hopkinson Pressure Bar Tests of Ceramics at High Strain Rate 55 Residual Stress in Ceramic Zirconia-Porcelain Crowns by Nanoindentation 67 Design and Development Approach for Gas Turbine Combustion Chambers Made of Oxide Ceramic Matrix Composites 77 Effects of Preloading on Foreign Object Damage in an N720/Alumina Oxide/Oxide Ceramic Matrix Composite 89 Frequency and Hold-Time Effects on Durability of Melt-Infiltrated SiC/SiC 101 Mechanical and Microstructural Characterization of Reaction Bonded Silicon Carbide Processed with Petroleum Coke 111 NONDESTRUCTIVE EVALUATION Identification of Damage Modes in Ceramic Matrix Composites by Acoustic Emission Signal Pattern Recognition 123 An Indentation Based Non-Destructive Evaluation Technique for Thermal Barrier Coating Spallation Prediction 135 Determination of Apparent Porosity Level of Refractory Concrete Using Ultrasonic Pulse Velocity Technique and Image Analysis 151 PROCESSING-MICROSTRUCTURE-PROPERTIES CORRELATIONS Sintering Behavior of Lithium-Titanate Pebbles: Modifications of Microstructure and Pore Morphology 165 Silicon Carbide Based Sandwich Structures: Processing and Properties 171 Chemically Bonded Phosphate Ceramics with Different Fiber Reinforcements 181 Preceramic-Polymer-Bonded SiC Preforms for High Volume Fraction SiCp/AI Composites 189 Novel High Temperature Wound Oxide Ceramic Matrix Composites Manufactured via Freeze Gelation 201 Effect of Reaction Time on Composition and Properties of SiC-Diamond Ceramic Composites 213 Pressureless Sintering of Boron Carbide Using Amorphous Boron and SiC as Additives 223 Effect of Reactive Heat Treatment on Properties of AI-Mg-B4C Composites 229 Cohesive Strength of Dry Powders Using Rheology 237 Effect of Heat Treatment on Thermal Properties of Pitch-Based Carbon Fiber and Pan-Based Carbon Fiber Carbon-Carbon Composites 245 TRIBOLOGICAL PROPERTIES OF CERAMICS AND COMPOSITES Ceramic Foam/Aluminium Alloy Interpenetrating Composites for Wear Resistance Applications 257 An Experimental Study on the Effects of SiC on the Sintering and Mechanical Properties of Cr3C2-NiCr Cermets 271 Increasing the Operating Pressure of Gasoline Injection Pumps via Ceramic Sliding Systems 281 Property and Microstructural Correlations to Wear on Reaction Bonded Materials 297 Author Index 305
Emmanuel E. Boakye, Pavel S. Mogilevsky, T. A. Parthasarathy, Randall S. Hay, Michael K. Cinibulk, and M. Ahrens
R. S. Hay, G. E. Fair, E. E. Boakye, P. Mogilevsky, T. A. Parthasarathy, M. Ahrens, and T. J. Godar
Christian Wilhelmi, Thays Machry, Ralf Knoche, and Dietmar Koch
R. S. Hay, G. E. Fair, R. Bouffioux, E. Urban, J. Morrow, A. Hart, and M. Wilson
Jianming Yuan, Jan Ma, and Geoffrey E.B. Tan
Y. Zhang and J. C. Hanan
Ralf Knoche, Erich Werth, Markus Weth, Jesus Gomez Garcia, Christian Wilhelmi, and Miklos Gerendäs
D. Calvin Faucett and Sung R. Choi
G. Ojard, Y. Gowayed, G. Morscher, U. Santhosh, J. Ahmad, R. Miller, and R. John
Rodrigo P. Silva and Celio A. Costa
N. Godin, M. R'Mili, P. Reynaud, G. Fantozzi, and J. Lamon
J. M. Tannenbaum, K. Lee, B. S.-J. Kang, and M. A. Alvin
Anja Terzic , Ljubica Pavlovic , and Vojislav Mitic
D. Mandal, D. Sen, S. Mazumder, MRK Shenoi, S. Ramnathan, and D. Sathiyamoorthy
Alberto Ortona, Claudio D'Angelo, Simone Pusteria, and Sandra Gianella
H. A. Colorado, C. Hiel, and H. T. Hahn
Kuljira Sujirote, Kannigar Dateraksa, Sukunthakan Ngernbamrung, Ryan McCuiston, Trinmet Sungkapan, and Jessada Wannasin
Thays Machry, Christian Wilhelmi, and Dietmar Koch
S. Salamone, and O. Spriggs
Celio A. Costa, Victor Manuel, Jose Brant de Campos, and Pedro Augusto de S.L. Cosentino
M. K. Aghajanian, A. L. McCormick, and W. M. Waggoner
Nicholas Ku, Sara Reynaud, Chuck Rohn, and Rich Haber
Sardar S. Iqbal, Ralph Dinwiddie, Wallace Porter, Michael Lance, and Peter Filip
J. Liu, J, Binner, R. Higginson, and C. Munnings
Ali Ozer, Waltraud M. Kriven, and Yahya Kemal Tur
C. Pfister, H. Kubach, and U. Spicher
A. L. Marshall and S. Salamone
Subject Areas: Mechanical engineering & materials [TG]
