Freshly Printed - allow 7 days lead
Couldn't load pickup availability
Environmental Issues and Waste Management Technologies in the Materials and Nuclear Industries XII
Alex Cozzi (Edited by), A Cozzi (Author), Tatsuki Ohji (Edited by)
9780470408483, Wiley
Hardback, published 28 August 2009
320 pages
24.1 x 16.3 x 2.2 cm, 0.585 kg
This book documents a special collection of articles from a select group of invited prominent scientists from academia, national laboratories and industry who presented their work at the symposia on Environmental and Energy Issues at the 2008 Materials Science and Technology (MS&T’08) conference held in Pittsburgh, PA. These articles represent a summary of the presentations focusing on topics in nuclear, environmental, and green engineering were held, including a discussion of Waste Glass Leach Testing and Modeling.
Preface ix CERAMICS AND GLASS FOR WASTE MINIMIZATION, STABILIZATION AND DISPOSITION Glasses for Immobilizing Lanthanide, Alkali, and Alkali-Earth Fission Products 3 Full-Scale Cold Crucible Test on Vitrification of Savannah River Site SB4 HLW Surrogate 9 Processing Fly Ash from Coal Burning Power Station in a Variable Radiofrequency Field 21 NETEC Cold Crucible Induction Melter Demonstration for SRNL with Simulated Sludge Batch 4 DWPF Waste 29 Adsorption and Separation of Uranium Using Tungsten Oxides 39 Accelerated Processing of SB4 and Preparation for SB5 Processing at DWPF 47 Effect of Compositional Changes on the Structure and Crystallization Tendency of a Borosilicate Glass Containing MoO©ý, 59 The lmmobilisation of a Chloride Containing Actinide Waste Surrogate 69 in Calcium Aluminosilicate Glasses 69 International Studies of Enhanced Waste Loading and Improved Melt Rate For High Alumina Concentration Nuclear Waste Glasses 81 Leach Testing Applied to the Investigation of Long-Term Behavior of High-Level Waste Glass: French Experience 93 SCKCEN R&D on the Interaction between Nuclear Waste Glass and Clay Near- and Far-Field Materials 103 GLAMOR-Or How We Achieved a Common Understanding on the Decrease of Glass Dissolution Kinetics 115 Characterization of Vitrified Savannah River Site SB4 Waste Surrogate Produced in Cold Crucible Induction Melter 127 Accelerated Weathering of Waste Glass at 90°C with the Pressurized Unsaturated Flow (PUF) Apparatus: Implications for Predicting Glass Corrosion with a Reactive Transport Model 141 The Product Consistency Test (PCT): How and Why it Was Developed 155 GREEN TECHNOLOGIES FOR MATERIALS MANUFACTURING AND PROCESSING Green Process for Recovery of Copper 171 Exploiting Hall-Petch Strengthening for Sustainability 177 Novel Process Development with Continuous Casting and Precise Forging for AI-Si Alloys to Produce an Engine Piston 189 Pilot Testing of a Green, No-Waste Process to Maximize Value from Hot Aluminum Dross 201 Effect of Bismuth on the Tensile Properties and Dry Machining Performance of At-1 2.7 wt% Si Alloy 215 Engineering Decisions to Green the Automobile Supply Chain 225 Novel Ceramic Forming Methods with a Reactive Organic Binder 235 Environmental Assessment of Manufacturing with Carbon Nanotubes 243 Nitrate Fining and Emissions During Glass Manufacturing 255 Low-Cost Solid Geopolymeric Material for Water Purification 265 Exergy Analysis on Life Cycle of Ceramic Parts 273 Anion Exchange Property of As(lll), AsW, Se(lv), CrR(V1) and B(111) with Hydrotalcite-Like Compounds 283 Preparation of Metal Oxide Photocatalyst by Soft Solution Process with Anion Exchange Resin 291 Photocatalytically Efficient Zinc Oxide Microstructural Assembly 299 Author Index 309
J. V. Crum and J. D. Vienna
A.P. Kobelev, S.V. Stefanovsky, V.V. Lebedev, M.A. Polkanov, V.V. Gorbunov, A.G. Ptashkin, O.A. Knyazev, J.C. Marra, and K.D. Gerdes
L. Barbieri, I. Lancellotti, F. Andreola, A. Corradi, C. Leonelli, and M. La Robina
Michael E. Smith, Allan B. Barnes, Alex S. Choi, and James C. Marra
Hamed Albusaidi and Allen W. Apblett
C.C. Herman
M. Magnin, S. Schuller, D. Caurant, 0. MajBrus, D. de Ligny, and C. Mercier
J. M. Schofield, P. A. Bingham, R. J. Hand
Kevin M. Fox, David K. Peeler, James C. Marra, Albert Aloy, Roman Soshnikov, Alexander V. Trofimenko, John D. Vienna, Brian J. Riley, Dong-Sang Kim and Jarrod V. Crum
S. Gin and P. Frugier
Pierre Van Iseghem, Karel Lemmens, Elie Valcke and Marc Aertsens
P. Van Iseghem, M. Aertsens, S. Gin, D. Deneele, B. Grambow, D. Strachan, P. McGrail, and G. Wicks
S.V. Stefanovsky, J.C. Marra, and A.A. Akatov
E. M. Pierce and D. H. Bacon
Carol M. Jantzen and Ned E. Bibler
Kevin N. Barber and Allen W. Apblett
R. Heard, U. Erb, and G. Palumbo
0. Umezawa, H. Takagi, T. Sekiguchi, T. Yamashita, and N. Miyamoto
0. R. Singleton
P. Chen, H. Hu, and A. T. Alpas
J. A. Isaacs, B. Dolinsky, D. M. Qualters, and J. T. Laird
Kimiyasu Sato, Yuji Hotta, Takaaki Nagaoka, Koji Watari, and Cihangir Duran
L. J. Dahlben and J.A. lsaacs
Linda E. Jones and Shengchun Luo
M. Alshaaer, B. El-Eswed, R. I. Yousef, F. Khalili, and H. Khoury
Hideki Kita, Hideki Hyuga, Naoki Kondo, and Tatsuki Ohji
Junji Shibata, Norihiro Murayama and Shigeno Matsumoto
Yoshiyuki Kamo, Masayoshi Uno, and Shinsuke Yamanaka
I.H.J. Arellano and L.M. Payawan, Jr.
Subject Areas: Mechanical engineering & materials [TG]
