Freshly Printed - allow 7 days lead
Couldn't load pickup availability
Developments in Strategic Materials and Computational Design IV, Volume 34, Issue 10
Waltraud M. Kriven (Edited by), WM Kriven (Author), Jingyang Wang (Edited by), Yanchun Zhou (Edited by), Andrew Gyekenyesi (Edited by), Soshu Kirihara (Volume editor), Sujanto Widjaja (Volume editor)
9781118807279, Wiley
Hardback, published 10 December 2013
336 pages
24.1 x 16.5 x 2.7 cm, 0.676 kg
Ceramic Engineering and Science Proceedings Volume 34, Issue 10 - Developments in Strategic Materials and Computational Design IV A collection of 25 papers from The American Ceramic Society's 37th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 27-February 1, 2013. This issue includes papers presented in the Geopolymers and Chemically Bonded Ceramics (Focused Session 1); Thermal Management Materials and
Technologies (Focused Sessoin 2); and Materials for Extreme Environments: Ultrahigh Temperature Ceramics and Nano-laminated Ternary Carbides and Nitrides (MAX Phases) (Symposium 12).
Preface ix Introduction xi GEOPOLYMERS AND CHEMICALLY BONDED CERAMICS Importance of Metakaolin Impurities for Geopolymer Based Synthesis 3 Mechanical Strength Development of Geopolymer Binder and the Effect of Quartz Content 13 The Role of Si02 and Al203 on the Properties of Geopolymers with and without Calcium 25 Synthesis of Thermostable Geopolymer-Type Material from Waste Glass 37 The Effect of Curing Conditions on Compression Strength and Porosity of Metakaolin-Based Geopolymers 49 Chemically Bonded Phosphate Ceramics Subject to Temperatures Up to 1000° C 57 Mechanical Properties of Geopolymer Composite Reinforced by Organic or Inorganic Additives 67 Evaluation of Geopolymer Concretes at Elevated Temperature 79 Basic Research on Geopolymer Gels for Production of Green Binders and Hydrogen Storage 97 Mechanical Characteristics of Cotton Fibre Reinforced Geopolymer Composites 115 Green Composite: Sodium-Based Geopolymer Reinforced with Chemically Extracted Com Husk Fibers 123 Optimization and Characterization of Geopolymer Mortars using Response Surface Methodology 135 Evaluation of Graphitic Foam in Thermal Energy Storage Applications 151 THERMAL MANAGEMENT MATERIALS AND TECHNOLOGIES Q-State Monte Carlo Simulations of Anisotropic Grain Growth in Single Phase Materials 159 VIRTUAL MATERIALS (COMPUTATIONAL) DESIGN AND CERAMIC GENOME Numerical Calculations of Dynamic Behavior of a Rotating Ceramic Composite with a Self-Healing Fluid 173 Explicit Modeling of Crack Initiation and Propagation in the Microstructure of a Ceramic Material Generated with Voronoi Tessellation 185 Kinetic Monte Carlo Simulation of Cation Diffusion in Low-K Ceramics 197 Effective Thermoelastic Properties of C/C Composites Calculated using 3D Unit Cell Presentation of the Microstructure 213 Inelastic Design of MMCS with Lamellar Microstructure 221 Multi-Scale Modeling of Textile Reinforced Ceramic Composites 233 Numerical Estimation of the Infiltrability of Woven CMC Preforms 247 Multiscale Extraction of Morphological Features in Woven CMCs 253 MATERIALS FOR EXTREME ENVIRONMENTS: ULTRAHIGH TEMPERATURE CERAMICS AND NANOLAMINATED TERNARY CARBIDES AND NITRIDES Influence of Precursors Stoichiometry on SHS Synthesis of Ti2AIC Powders 265 XRD and TG-DSC Analysis of the Silicon Carbide-Palladium Reaction 273 Modelling Damage and Failure in Structural Ceramics at Ultra-High Temperatures 283 Influence of Precursor Zirconium Carbide Powders on the Properties of the Spark Plasma Sintered Ceramic Composite Materials 297 SECOND ANNUAL GLOBAL YOUNG INVESTIGATOR FORUM Dielectric and Piezoelectric Properties of Sr and La CO-Doped PZT Ceramics 311 Author Index 321
A. Autef, E. Joussein, G. Gasgnier, and S. Rossignol
C. H. Riischer, A. Schulz, M. H. Gougazeh, and A. Ritzmann
P. De Silva, S. Hanjitsuwan, and P. Chindaprasirt
Qin Li, Zengqing Sun, Dejing Tao, Hao Cui, and Jianping Zhai
Bing Cai, Torbjorn Mellgren, Susanne Bredenberg, and Hakan Engqvist
H. A. Colorado, C. Hiel, and J. M. Yang
E. Prud'homme, P. Michaud, S. Rossignol, and E. Joussein
Kunal Kupwade-Patil, Md. Sufian Badar, Milap Dhakal, and Erez N. Allouche
C. H. Ruscher, L. Schomborg, A. Schulz, and J. C. Buhl
T. Alomayri and I.M. Low
Sean S. Musil, P. F. Keane, and W. M. Kriven
Milap Dhakal, Kunal Kupwade-Patil, Erez N. Allouche, Charles Conner, la Baume Johnson, and Kyungmin Ham
Peter G. Stansberry and Edwin Pancost
J. B. Allen, C. F. Comwell, B. D. Devine, and C. R. Welch
Louiza Benazzouk, Eric Arquis, Nathalie Bertrand, Cedric Descamps, and Marc Valat
S. Falco, N. A. Yahya, R. I. Todd, and N. Petrinic
Brian Good
Galyna Stasiuk, Romana Piat, Vinit V. Deshpande, and Puneet Mahajan
Yuriy Sinchuk and Romana Piat
J. Vorel, S. Urbanova, E. Grippon, I. Jandejsek, M. Marsalkova, M. Sejnoha
G. L. Vignoles, W. Ros, and C. Germain
C. Chapoullie, C. Germain, J-P. Da Costa, G. L. Vignoles, and M. Cataldi
L. Chlubny, J. Lis, and M.M. Bucko
M. Gentile, P.Xiao, and T. Abram
M. Pettina, F. Biglari, D. D. Jayaseelan, L. J. Vandeperre, P. Brown, A. Heaton, and K. Nikbin
Nikolai Voltsihhin, Irina Hussainova, Simo-Pekka Hannula, and Mart Viljus
Volkan Kalem and Muharrem Timucin
Subject Areas: Mechanical engineering & materials [TG]
