Freshly Printed - allow 7 days lead
Couldn't load pickup availability
Developments in Strategic Ceramic Materials II
A Collection of Papers Presented at the 40th International Conference on Advanced Ceramics and Composites, January 24-29, 2016, Daytona Beach, Florida, Volume 37, Issue 7
Waltraud M. Kriven (Edited by), Kriven (Author), Jingyang Wang (Edited by), Yanchun Zhou (Edited by), Dongming Zhu (Edited by), Gustavo Costa (Edited by), Manabu Fukushima (Volume editor), Andrew Gyekenyesi (Volume editor)
9781119321781, Wiley
Hardback, published 6 January 2017
296 pages
23.6 x 15.8 x 2.3 cm, 0.59 kg
This issue contains 27 papers from The American Ceramic Society’s 40th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 24-29, 2016. This issue includes papers presented in the following Symposia and Focused Sessions: Symposium 2 – Advanced Ceramic Coatings for Structural, Environmental, and Functional Applications; Symposium 10 – Virtual Materials (Computational) Design and Ceramic Genome; Symposium 11 – Advanced Materials and Innovative Processing Ideas for the Industrial Root Technology; Symposium 12 – Materials for Extreme Environments: Ultrahigh Temperature Ceramics; and Emerging Technologies Symposium–Carbon Nanostructures; and Focused Session 1 - Geopolymers and Chemically Bonded Ceramics.
Preface ix Introduction xi GEOPOLYMERS Durability Performance of Alkali-Activated Metakaolin, Slag, Fly Ash, and Hybrids 3 Mica Platelet-Reinforced Geopolymer Composites 13 Influence of Mix Design Parameters on Geopolymer Mechanical Properties and Microstructure 21 Thermal Performance of Metakaolin-Based Geopolymers: Volume Stability and Residual Mechanical Properties 35 Effect of Phyllosilicate Type on the Microstructure and Properties of Kaolin-Based Ceramic Tapes 47 Effect of Alkali Cations on the Polycondensation Reaction 61 Development of a Mold for Thermoplastics Based on a Phosphate Cement 69 Properties of Cork Particle Reinforced Sodium Geopolymer Composites 79 The Role of Alkaline Earth Ions in Geopolymer Binder Formation 83 Investigations of the Thermally Induced Hydrogen Release of NaBH4, NH3BH3 and Their Geopolymer Composites 93 IR-Spectroscopic Investigation of Geopolymer and CSH-Phase Stability on Heating Temperature in Post-Fired Building Materials 109 Mixed Alkali Regional Metakaolin-Based Geopolymer 123 Bamboo-Geopolymer Composite: A Preliminary Study 135 Metakaolin-Based Geopolymer Cements from Commercial Sodium Waterglass and Sodium Waterglass from Rice Husk Ash: A Comparative Study 145 Recycling of Grog by Addition Into Heavy Clay Ceramic Manufacturing 159 VIRTUAL MATERIALS DESIGN AND CERAMIC GENOME Q-State Monte Carlo Simulations of Magnetic Anisotropy Applied to Paramagnetic and Diamagnetic Materials 169 First Principles Study of Defect Formation in Bulk B6O 181 Modeling of Damage in an MMC with Lamellar Microstructure 189 Micro-Computed Tomography Image Based Thermo-Elastic Properties Studies of Freeze-Cast MMC 201 MATERIALS FOR EXTREME ENVIRONMENTS Densification and Phase Evolution of SHS Derived Ti2AlN Active Precursor Powders During Hot Pressing Processes 213 Max Phase Materials for Nuclear Applications 223 Analysis of Dynamic Young's Modulus and Damping Behavior of ZrB2-SiC Composites by the Impulse Excitation Technique 235 ADVANCED CERAMIC COATINGS Study of Effect of Hafnium Addition on Oxidation Resistance of NiAl Coatings Prepared by an In-Situ Chemical Vapour Deposition Method 249 Mass Transfer Mechanism in Mullite Under Oxygen Potential Gradients at High Temperatures 261 EMERGING TECHNOLOGIES—CARBON NANOSTRUCTURES SnO2-Reduced Graphene Oxide Nanocomposite for Ethanol Sensing at Room Temperature 273 Author Index 281
F. Jirasit, C. H. Rüscher, L. Lohaus, and P. Chindaprasirt
P. F. Keane, G. P. Kutyla, J. F. Wight, W. Rickard, and W. M. Kriven
Mukund Lahoti, En-Hua Yang, and Kang Hai Tan
Mukund Lahoti, En-Hua Yang, and Kang Hai Tan
Gisèle L. Lecomte-Nana , Khaoula Lebdioua,, Mylène Laffort, Nadia Houta, Nicolas Tessier-Doyen, Younès Abouliatim, and Claire Peyratout
J. Peyne, E. Joussein, J. Gautron, J. Doudeau, and S. Rossignol
J. Blom, H. Rahier, and J. Wastiels
Daniel S. Roper, Gregory P. Kutyla, and Waltraud M. Kriven
N. Essaidi, P. Leybros, E. Joussein, and S. Rossignol
Z. Assi, L. Schomborg, and C. H. Rüscher
C. H. Rüscher, E. Rigo, K. Unterderweide, H.-W. Krauss, and F. Jirasit
Ruy A. Sá Ribeiro, Marilene G. Sá Ribeiro, Kaushik Sankar, Gregory P. Kutyla, and Waltraud M. Kriven
Ruy A. Sá Ribeiro, Marilene G. Sá Ribeiro, Kaushik Sankar, and Waltraud M. Kriven
Hervé K. Tchakouté and Claus H. Rüscher
C. M. F. Vieira and L. F. Amaral
J. B. Allen
J. S. Dunn, S. P. Coleman, and M. Tschopp
Romana Piat, Maria Kashtalyan, and Igor Guz
Yuri Sinchuk, Romana Piat, and Benoit Nait-Ali
L. Chlubny, J. Lis, P. Borowiak, K. Chabior, and K. Ziele ska
K. Lambrinou1, T. Lapauw, B. Tunca, and J. Vleugels
Akhilesh Kumar Swarnakar, Songlin Ran, and Jozef Vleugels
A. D. Chandio and P. Xiao
S. Kitaoka, T. Matsudaira, N. Kawashima, D. Yokoe, T. Kato, and M. Takata
C. A. Zito and D. P. Volanti
Subject Areas: Mechanical engineering & materials [TG]
