Freshly Printed - allow 7 days lead
Couldn't load pickup availability
Developments in Strategic Ceramic Materials
A Collection of Papers Presented at the 39th International Conference on Advanced Ceramics and Composites, January 25-30, 2015, Daytona Beach, Florida, Volume 36 Issue 8
Waltraud M. Kriven (Edited by), Jingyang Wang (Edited by), Dongming Zhu (Edited by), Thomas Fischer (Edited by), Soshu Kirihara (Series edited by)
9781119211730, Wiley
Hardback, published 16 February 2016
352 pages
24.1 x 16 x 2.8 cm, 0.708 kg
The Ceramic Engineering and Science Proceeding has been published by The American Ceramic Society since 1980. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.
Preface ix Introduction xi GEOPOLYMERS AND CHEMICALLY BONDED CERAMICS Properties of Granite Powder Reinforced Potassium Geopolymer 3 Ceramic Felt Reinforced Geopolymer Composites 11 Ammonia-Borane Geopolymer (AB-G) Composite 21 Monitoring the Structural Evolution during Geopolymer Formation by 27Al NMR 37 Recycled Geopolymer on New Formulations 49 Impact of Alkaline Solution and Curing Temperature on Microstructure and Mechanical Properties of Alkali-Activated Blast Furnace Slag 61 Long-Term Development of Mechanical Strengths of Alkali-Activated Metakaolin, Slag, Fly Ash, and Blends 77 Preparation of Geopolymer-Type Mortar and “Light-Weight Concrete” from Copper Floatation Waste and Coal Combustion By Products 89 Portland Cement with Luffa Fibers 103 VIRTUAL MATERIALS (COMPUTATIONAL) DESIGN AND CERAMIC GENOME Two-Phase Nanocrystalline/Amorphous Simulations of Anisotropic Grain Growth using Q-State Monte-Carlo 115 First Principles Calculations of Dopant Effects in Boron Suboxide 131 Composition Dependent Hardness of Covalent Solid Solutions and Its Electronic Structure Origin 143 Experimental and Numerical Determination of the Elastic Moduli of Freeze Cast MMC with Different Lamellae Orientation 153 Doping of CeO2 as a Tunable Buffer Layer for Coated Superconductors: A DFT Study of Mechanical and Electronic Properties 169 Quantitative Analysis of (La0.8Sr0.2)0.98MnO3± Electronic Conductivity using CALPHAD Approach 179 ADVANCED CERAMIC COATINGS The Effects of Ni3Al Binder Content on the Electrochemical Response of TiC-Ni3Al Cermets 193 A Study of a NiAl Bondcoat Deposited onto CMSX-4 Superalloy for Thermal Barrier Applications 203 Mechanical Properties of Air Plasma Sprayed Environmental Barrier Coating (EBC) Systems: Preliminary Assessments 219 Iron-Copper Nitride Thin Films Fabricated by Sputtering 239 MATERIALS FOR EXTREME ENVIRONMENTS: ULTRAHIGH TEMPERATURE CERAMICS AND NANOLAMINATED TERNARY CARBIDES AND NITRIDES Influence of Nitrogen Pressure on SHS Synthesis of Ti2AlN Powders 253 Ultra High Temperature Ceramic Coatings for Environmental Protection of Cf/SiC Composites 261 MATERIALS DIAGNOSTICS AND STRUCTURAL HEALTH MONITORING OF CERAMIC COMPONENTS AND SYSTEMS Nanomonitoring of Ceramic Surface 275 Semi-Automated Inspection Unit for Ceramics 283 ADVANCED MATERIALS AND INNOVATIVE PROCESSING FOR THE INDUSTRIAL ROOT TECHNOLOGY Modelling of Fluid Flow in Tape Casting of Thin Ceramics: Analytical Approaches and Numerical Investigations 291 2ND EUROPEAN-USA ENGINEERING CERAMICS SUMMIT AND 4TH GLOBAL YOUNG INVESTIGATORS FORUM Wettability and Reactivity of Y2O3 with Liquid Nickel and Its Alloys 309 Computational Materials Science: Where Theory Meets Experiments 323 Author Index 335
Daniel S. Roper, Gregory P. Kutyla, and Waltraud M. Kriven
Elias C. Koehler and Waltraud M. Kriven
Lars Schomborg, Zeina Assi, J. Christian Buhl, Claus H. Rüscher, and Michael Wark
Ameni Gharzouni, Emmanuel Joussein, Isabel Sobrados, Jesus Sanz, Samir Baklouti, Basma Samet, and Sylvie Rossignol
N. Essaidi, L. Vidal, F.Gouny, E. Joussein, and S. Rossignol
Elodie Prud’homme, Jean Ambroise, and Marie Michel
F. Jirasit, C. H. Rüscher, L. Lohaus, and P. Chindaprasirt
J. Temuujin, A. Minjigmaa, B. Davaabal, Ts. Zolzaya and U. Bayarzul, Ts.Jadambaa, and C. H. Rüscher
H. A. Colorado, S. A. Colorado, and R. Buitrago-Sierra
J. B. Allen
J. S. Dunn, A. B. Rahane, and Vijay Kumar
Qing-Miao Hu, Rui Yang, Börje Johansson, and Levente Vitos
Matthias Merzkirch, Yuri Sinchuk, Kay André Weidenmann, and Romana Piat
Danny E. P. Vanpoucke
Shadi Darvish, Surendra K, Saxena, and Yu Zhong
M. B. Holmes, A. Ibrahim, G. J. Kipouros, Z. N. Farhat, and K. P. Plucknett
A. D. Chandio, X. Zhao, Y. Chen, M. Bai, and P. Xiao
Bradley T. Richards, Dongming Zhu, Louis J. Ghosn, and Haydn N. G. Wadley
Xingwu Wang, James P. Parry, Hrishikesh Kamat, Ruikun Pan, and Hao Zeng
L. Chlubny, J. Lis, and M. M. Buko
Franziska Uhlmann, Christian Wilhelmi, Steffen Beyer, Stephan Schmidt-Wimmer, and Stefan Laure
V. A. Lapina, P. P. Pershukevich, T. A. Pavich, S. B. Bushuk, and J. Opitz
Christian Wolf, Andreas Lehmann, and Gregor Unglaube
Masoud Jabbari and Jesper Hattel
N. Sobczak, R.M. Purgert, R. Asthana, J.J. Sobczak, M. Homa, R. Nowak, G. Bruzda, A. Siewiorek, and Z. Pirowski
Danny E. P. Vanpoucke
Subject Areas: Mechanical engineering & materials [TG]
