Freshly Printed - allow 10 days lead
Couldn't load pickup availability
Ceramics and Ceramic Composites
Materialographic Preparation
G. Elssner (Author), H. Hoven (Author), G. Kiessler (Author), P. Wellner (Author)
9780444100306, Elsevier Science
Hardback, published 14 December 1999
186 pages
24.1 x 15.9 x 1.9 cm, 0.48 kg
Ceramics and ceramic composites are now used in almost all areas of technology and have potential for even greater and more widespread applications. To make this a reality, it is increasingly necessary to understand the microstructure of the material and its relationship with properties and performance. Central to this is the characterization of the material, in particular using optical and scanning electron microscopy techniques. This book acts as an expert guide to the various steps necessary for successful and accurate characterization of these materials including the crucially important preparation stage, the techniques used to reveal the microstructure and the analysis of the results. In particular, the book presents fundamental information on preparing polished sections of ceramics and ceramic composites including the main steps of sampling, sectioning, mounting and impregnation, and mechanical grinding, lapping and polishing. It discusses microstructural imaging in the optical microscope (OM) and the use of the scanning electron microscope (SEM). Etching or contrast enhancement following final polishing in order to reveal the material's microstructure is also covered. An entire chapter is devoted to material-specific preparation procedures for polished sections. These procedures take into account the properties of the ceramic or composite being examined and the purpose of the examination. They have proven to be very suitable for the respective materials and are effective for revealing the pores. The examples presented here for ceramics and ceramic composites provide polished sections of good to excellent quality for routine examination under the optical microscope. They include tips for etching and contrast enhancement, as well as microstructural images. Chapter 5 discusses the preparation of polished sections for purposes of examination and contains information on producing oblique sections and controlled removal of material. It also addresses the production of thin sections. As a complement to the examination of the microstructure, chapter 6 provides insight into the evaluation of hardness testing indentations. Chapter 7 concludes this work with an overview of the technical literature.
Chapter and section headings: Abbreviations. Introduction. Fundamentals of Preparing Polished Sections. Selection and Sampling. Sectioning. Mounting and Impregnation. Grinding, Lapping, and Polishing. Revealing the Microstructure. Microstructural Imaging in the Optical Microscope (OM). Tips on Contrast Enhancement and Etching. Microstructural Imaging in the Scanning Electron Microscope. Ultrasonic Scanning Microscopy. Material-Specific Preparation of Polished Sections. Properties of Ceramic Materials. Pores in Ceramic Materials. Examples of Preparing Ceramic Materials. Preparation of Ceramic Composites. Examples of Preparing Ceramic Composites. Preparing Polished Sections for Examination. Polished Sections. Thin Sections. Analysis of Hardness Testing Indentations. Hardness Testing of Ceramic Materials. Determining Fracture Toughness by Indentation Hardness Testing. Application of Hardness Testing to Composite Layers and Surface Layers. Literature. Appendix.
Subject Areas: Materials science [TGM], Ceramics & glass technology [TDCQ]
