Freshly Printed - allow 7 days lead
Couldn't load pickup availability
Ceramic Materials for Energy Applications IV
A Collection of Papers Presented at the 38th International Conference on Advanced Ceramics and Composites, January 27-31, 2014, Daytona Beach, FL, Volume 35, Issue 7
Hua-Tay Lin (Edited by), HT Lin (Author), Yutai Katoh (Edited by), Josef Matyas (Edited by), Andrew Gyekenyesi (Volume editor), Michael Halbig (Volume editor)
9781119040279, Wiley
Hardback, published 27 January 2015
176 pages
24.3 x 16.3 x 1.6 cm, 0.422 kg
A collection of 14 papers from The American Ceramic Society’s 38th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 26-31, 2014. This issue includes papers presented in Symposia 6 - Advanced Materials and Technologies for Energy Generation, Conversion, and Rechargeable Energy Storage and Symposium 13 - Advanced Ceramics and Composites for Sustainable Nuclear Energy and Fusion Energy.
Preface vii Introduction ix CERAMICS FOR ENERGY STORAGE AND CONVERSION Towards the Conversion of a Solid Oxide Cell into a High Temperature Battery 3 Design and Fabrication of All-Solid-State Rechargeable Lithium Batteries for Future Applications 13 Nanostructured LiCoO2 Cathode by Hydrothermal Process 23 Thermoelectric Properties of Na0.8Co1-xFexO2 Ceramic Prepared by Spark Plasma Sintering 35 Effects of Sintering Temperature on Thermoelectric Properties of Nanocrystalline Ca0.9Yb0.1MnO3 Prepared by Co-Precipitation Method 43 Effect of Film Thickness on the Photocatalytic Performance of TiO2 Thin Films Deposited by Spin Coating 51 Effect of Heat Treatment Temperature on Properties of Nanocrystalline, Photoactive, Titania, Thin Films on Polymer and Fused Quartz 61 Development of Electro-Optical Single Crystals for Energy Saving 77 CERAMICS AND COMPOSITES FOR NUCLEAR ENERGY Modeling Structural Loading of Used Nuclear Fuel under Conditions of Normal Transportation 95 Flexural Strength of Composite Tubes for SMR Applications using Pure Bending: Draft ASTM Test Method 111 Hoop Tensile Strength of Ceramic Matrix Composite Tubes for LWRS Applications using Elastomeric Inserts: Draft ASTM Test Method 119 Ceramic Matrix Composites in Ti-B-Cr and Ti-B-Nb Systems Fabricated “In Situ” by Self-Propagating High-Temperature Synthesis 127 Comparison of Shear Strength of Ceramic Joints Determined by Various Test Methods With Small Specimens 139 Processing and Characterization of Diffusion-Bonded Silicon Carbide Joints using Molybdenum and Titanium Interlayers 151 Author Index 161
C. M. Berger, O. Tokariev, P. Orzessek, A. Hospach, N. H. Menzler, M. Bram, W. J. Quadakkers, and H.-P. Buchkremer
Mao Shoji, Jungo Wakasugi, Ryo Osone, Teruaki Nishioka, Hirokazu Munakata, and Kiyoshi Kanamura
Kuan-Zong Fung, Chung-Ta Ni, Su-Yi Tsai, Mei-Han Chen, A. F. Orliukas, and Gunars Bajars
Cong Chen, Tianshu Zhang, Richard Donelson, Dewei Chu, Thiam Teck Tan, and Sean Li
Rezaul Kabir, Ruoming Tian, Danyang Wang, Richard Donelson, Thiam Teck Tan, and Sean Li
W.F. Chen, P. Koshy, B. Zhu, and C.C. Sorrell
Huynh Chau Pham, Pramod Koshy, Julian Michael Cox, and Charles Christopher Sorrell
Kiyoshi Shimamura, Stelian Arjoca, and Encarnación G. Víllora, Daisuke Inomata, Kazuo Aoki, Akiharu Funaki, Tsubasa Hatanaka, Takeshi Kizaki, and Kunihiro Naoe
Kenneth Geelhood, Harold Adkins, Scott Sanborn, Brian Koeppel, and Nicholas Klymyshyn
Michael G. Jenkins, Janine E. Gallego, and Thomas Nguyen
Michael G. Jenkins and Jonathan A. Salem
Marta Ziemnicka-Sylwester
Chunghao Shih, Yutai Katoh, Jim O. Kiggans, Takaaki Koyanagi, Hesham E. Khalifa, Christina A. Back, Tatsuya Hinoki, and Monica Ferraris
Takaaki Koyanagi, James Kiggans, Chunghao Shih, and Yutai Katoh
Subject Areas: Mechanical engineering & materials [TG]
