Freshly Printed - allow 7 days lead
Couldn't load pickup availability
Advances in Solid Oxide Fuel Cells VIII, Volume 33, Issue 4
Prabhakar Singh (Edited by), P Singh (Author), Narottam P. Bansal (Edited by), Michael Halbig (Volume editor), Sanjay Mathur (Volume editor)
9781118205945, Wiley
Hardback, published 8 January 2013
172 pages
24.1 x 16.3 x 1.6 cm, 0.386 kg
The Ninth International Symposium on Solid Oxide Fuel Cells: Materials, Science, and Technology was held in January 2012 as part of the 36th International Conference on Advanced Ceramics and Composites (ICACC). This symposium provided an international forum for scientists, engineers, and technologists from around the world to present and discuss the latest advances in solid oxide fuel cells. This issue features fourteen papers selected from the symposium, offering readers a broad panorama of the current status of solid oxide fuel cells technology, as well as emerging issues and future directions in the field.
Preface vii Introduction ix Investigation of Novel Solid Oxide Fuel Cell Cathodes Based on Impregnation of SrTixFe1_x03_5 into Ceria-Based Backbones 1 Freeze-Tape Casting for the Design of Anode-Delivery Layer in Solid Oxide Fuel Cells 13 Tailoring the Anode Microstructure in Micro-Tubular SOFCS by the Optimization of the Slurry 23 Mixed Conducting Praseodymium Cerium Gadolinium Oxide (PCGO) Nano-Composite Cathode for ITSOFC Applications 35 Development of GDC-(LiNa)C03 Nano-Composite Electrolytes For Low Temperature Solid Oxide Fuel Cells 47 Weibull Strength Variations between Room Temperature and High Temperature Ni-3YSZ Half-Cells 61 In-Situ XRD of Operating LSFC Cathodes: Development of a New Analytical Capability 71 Proton Conduction Behaviors in Ba- and Mg-Doped LaGaOs 85 Silver-Palladium Alloy Electrodes for Low Temperature Solid Oxide Electrolysis Cells (SOEC) 93 Development of Improved Tubular Metal-Supported Solid Oxide Fuel Cells Towards High Fuel Utilization Stability 105 Highlighting DOE EERE Efforts for the Development of SOFC Systems for APU and Stationary Applications 117 Efficient Planar SOFC Technology for a Portable Power Generator 125 Investigation of Ni-Yttha Stabilized Zirconia Anode for Solid-Oxide Fuel Cell using XAS Analysis 137 Processing of Gadolinium-Doped Ceria Electrolyte Layers with a Thickness of ~1 mm: Thin Film Wet Coating Methods and PVD 145 Author Index 159
M. Brinch-Larsen, M. Sogaard, J. Hjelm and H. L. Frandsen
Jacob Bunch, Yu Chen, Fanglin Chen, and Matthew May
Michele Casarin, Riccardo Ceccato, and Vincenzo M. Sglavo
Rajalekshmi Chockalingam, Ashok Kumar Ganguli, and Suddhasatwa Basu
Rajalekshmi Chockalingam, Ashok Kumar Ganguli, and Suddhasatwa Basu
Declan J. Curran, Henrik Lund Frandsen, and Peter Vang Hendriksen
John S. Hardy, Jared W. Templeton, and Jeffry W. Stevenson
Xuan Zhao, Nansheng Xu, Kevin Romito, Kevin Huang, Alisha Lucas, and Changyong Qin
Michael Keane and Prabhakar Singh
L. Otaegui, L. M. Rodriguez-Martinez, M. A. Alvarez, F. Castro, and I. Villarreal
David R. Peterson, Jacob S. Spendelow, and Dimitrios C. Papageorgopoulos
Andreas Poenicke, Sebastian Reuber, Christian Dosch, Stefan Megel, Mihails Kusnezoff, Christian Wunderlich, and Alexander Michaelis
Koichi Hamamoto, Toshio Suzuki, Bo Liang, Toshiaki Yamaguchi, Hirofumi Sumi, Yoshinobu Fujishiro, Brian Ingram, A. Jeremy Kropf, and J. David Carter
Tim Van Gestel, Hyo-Jeong Moon, Doris Sebold, Sven Uhlenbruck, and Hans Peter Buchkremer
Subject Areas: Mechanical engineering & materials [TG]
