Freshly Printed - allow 7 days lead
Couldn't load pickup availability
Advances in Solid Oxide Fuel Cells II, Volume 27, Issue 4
Andrew Wereszczak (Edited by), A Wereszczak (Author), Edgar Lara-Curzio (Edited by), Narottam P. Bansal (Edited by)
9780470080542, Wiley
Paperback / softback, published 15 December 2006
452 pages
23.5 x 15.8 x 2.1 cm, 0.611 kg
Due to its many potential benefits, including high electrical efficiency and low environmental emissions, solid oxide fuel cell (SOFC) technology is the subject of extensive research and development efforts by national laboratories, universities, and private industries. In these proceedings, international scientists and engineers present recent technical progress on materials-related aspects of fuel cells including SOFC component materials, materials processing, and cell/stack design, performance, and stability. Emerging trends in electrochemical materials, electrodics, interface engineering, long-term chemical interactions, and more are included.
This book is compiled of papers presented at the Proceedings of the 30th International Conference on Advanced Ceramics and Composites, January 22-27, 2006, Cocoa Beach, Florida. Organized and sponsored by The American Ceramic Society and The American Ceramic Society's Engineering Ceramics Division in conjunction with the Nuclear and Environmental Technology Division.
Preface xi Introduction xiii Overview and Current Status Development of Two Types of Tubular SOFCs at TOT0 3 Cell and Stack Development Development of Solid Oxide Fuel Cell Stack Using Lanthanum Gallate-Based Oxide as an Electrolyte 17 Anode Supported LSCM-LSGM-LSM Solid Oxide Fuel Cell 27 Characterization/Testing Influence of Anode Thickness on the Electrochemical Performance of Single Chamber Solid Oxide Fuel Cells 37 Investigation of Performance Degradation of SOFC Using Chromium-Containing Alloy Interconnects 47 Degradation Mechanism of Metal Supported Atmospheric Plasma Sprayed Solid Oxide Fuel Cells 55 Effect of Transition Metal Ions on the Conductivity and Stability of Stabilized Zirconia 67 Thermophysical Properties of YSZ and Ni-YSZ as a Function of Temperature and Porosity 79 Physical Properties in the Bi2O3-Fe2O3S ystem Containing Y2O3 and CaO Dopants 87 Electrical Properties of Ce0.8Gd0.2O1.9 Ceramics Prepared by an Aqueous Process 95 Structural Study and Conductivity of BaZr0.90Ga0.10O2.95 105 Hydrogen Flux in Terbium Doped Strontium Cerate Membrane 119 A Mechanical-Electrochemical Theory of Defects in Ionic Solids 125 Electrodes Nanostructured Ceramic Suspensions for Electrodes and the Brazilian SOFC Network "Rede PaCOS" 139 Modeling of MlEC Cathodes: The Effect of Sheet Resistance 153 Cathode Thermal Delamination Study for a Planar Solid Oxide Fuel Cell with Functional Graded Properties: Experimental Investigation and Numerical Results 161 Electrochemical Characteristics of Ni/Gd-Doped Ceria and Ni/Sm-Doped Ceria Anodes for SOFC Using Dry Methane Fuel 175 Control of Microstructure of NiO-SDC Composite Particles for Development of High Performance SOFC Anodes 183 Electrochemical Characterization and Identification of Reaction Sites in Oxide Anodes 193 Interconnects and Protective Coatings Corrosion Performance of Ferritic Steel for SOFC Interconnect Applications 201 High Temperature Corrosion Behavior of Oxidation Resistant Alloys Under SOFC Interconnect Dual Exposures 211 Electro-Deposited Protective Coatings for Planar Solid Oxide Fuel Cell Interconnects 223 Properties of (Mn,Co)3O4 Spinel Protection Layers for SOFC Interconnects 231 Fuel Cell Interconnecting Coatings Produced by Different Thermal Spray Techniques 241 Surface Modification of Alloys for Improved Oxidation Resistance in SOFC Applications 253 Seals Composite Seal Development and Evaluation 265 Investigation of SOFC-Gaskets Containing Compressive Mica Layers Under Dual Atmosphere Conditions 273 Performance of Self-Healing Seals for Solid Oxide Fuel Cells (SOFC) 287 Properties of Glass-Ceramic for Solid Oxide Fuel Cells 297 Mechanical Behavior of Solid Oxide Fuel Cell (SOFC) Seal Glass-Boron Nitride Nanotubes Composite 305 Mechanical Behaviour of Glassy Composite Seals for IT-SOFC Application 315 Mechanical Property Characterizations and Performance Modeling of SOFC Seals 325 Mechanical Properties Fracture Test of Thin Sheet Electrolytes 339 Failure Modes of Thin Supported Membranes 347 Comparison of Mechanical Properties of NiO/YSZ by Different Methods 361 Fracture Toughness and Slow Crack Growth Behavior of Ni-YSZ and YSZ as a Function of Porosity and Temperature 373 Effect of Thermal Cycling and Thermal Aging on the Mechanical Properties of, and Residual Stresses in, Ni-YSZ/YSZ Bi-Layers 383 Three-Dimensional Numerical Simulation Tools for Fracture Analysis in Planar Solid Oxide Fuel Cells (SOFCs) 393 Modeling Electrochemistry and On-Cell Reformation Modeling for Solid Oxide Fuel Cell Stacks 409 Modeling of HeaVMass Transport and Electrochemistry of a Solid Oxide Fuel Cell 419 Author Index 435
Akira Kawakami, Satoshi Matsuoka, Naoki Watanabe, Takeshi Saito, Akira Ueno, Tatsumi Ishihara, Natsuko Sakai, and Harumi Yokokawa
T. Yamada, N. Chitose, H. Etou, M. Yamada, K. Hosoi, N. Komada, T. Inagaki, F. Nishiwaki, K. Hashino, H. Yoshida, M. Kawano, S. Yamasaki, and T. lshihara
Alidad Mohammadi, Nigel M. Sammes, Jakub Pusz, and Alevtina L. Smirnova
B. E. Buergler, Y. Santschi, M. Felberbaum, and L. J. Gauckler
D. R. Beeaff, A. Dinesen, and P. V. Hendriksen
D. Hathiramani, R. VaOen, J. Mertens, D. Sebold, V. A. C. Haanappel, and D. Stover
D. Lybye and M. Mogensen
M. Radovic, E. Lara-Curzio, R. M. Trejo, H. Wang, and W. D. Porter
Hsin-Chai Huang, Yu-Chen Chang, and Tzer-Shin Sheu
Toshiaki Yamaguchi, Yasufumi Suzuki, Wataru Sakamoto, and Shin-ichi Hirano
lstaq Ahmed, Elisabet Ahlberg, Sten Eriksson, Christoper Knee, Maths Karlsson, Aleksandar Matic, and Lars Borjesson
Mohamed M. Elbaccouch and Ali T-Raissi
Narasimhan Swaminathan and Jianmin Qu
R. C. Cordeiro, G. S. Trindade, R. N. S. H. MagalhSies, G. C. Silva, P. R. Villalobos, M. C. R. S. Varela, and P. E. V. de Miranda
David S. Mebane, Erik Koep, and Meilin Liu
Gang Ju, Kenneth Reifsnider, and Jeong-Ho Kim
Caroline Levy, Shinichi Hasegawa, Shiko Nakamura, Manabu Ihara, and Keiji Yamahara
Koichi Kawahara, Seiichi Suda, Seiji Takahashi, Mitsunobu Kawano, Hiroyuki Yoshida, and Toru lnagaki
T. Nakamura, K. Yashiro, A. Kairnai, T. Otake, K. Sato, G.J . Park, T. Kawada, and J. Mizusaki
M. Ziomek-Moroz, G. R. Holcomb, B. S. Covino, Jr., S. J. Bullard, P. D. Jablonski, and D. E. Alrnan
Zhenguo Yang, Greg W. Coffey, Joseph P. Rice, Prabhakar Singh, Jeffry W. Stevenson, and Guan-Guang Xia
Christopher Johnson, Chad Schaeffer, Heidi Barron, and Randall Gemmen
Zhenguo Yang, Xiao-Hong Li, Gary D. Maupin, Prabhakar Singh, Steve P. Sirnner, Jeffry W. Stevenson, Guan-Guang Xia, and Xiaodong Zhou
E. Garcia and T. W. Coyle
David E. Alman, Paul D. Jablonski, and Steven C. Kung
Matthew M. Seabaugh, Kathy Sabolsky, Gene B. Arkenberg, and Jerry L. Jayjohn
F. Wiener, M. Brarn, H.-P. Buchkrerner, and D. Sebold
Raj N. Singh and Shailendra S. Parihar
S. T. Reis, R. K. Brow, T. Zhang, and P. Jasinski
Sung R. Choi, Narottam P. Bansal, Janet B. Hurst, and Anita Garg
K. A. Nielsen, M. Solvang, S. B. L. Nielsen, and D. Beeaff
Brian J. Koeppel, John S. Vetrano, Ba Nghiep Nguyen, Xin Sun, and Moe A. Khaleel
Jurgen Malzbender, Rolf W. Steinbrech, and Lorenz Singheiser
P. V. Hendriksen, J. R. Hprgsberg, A. M. Kjeldsen, B. F. Sorensena, and H. G. Pedersen
Dustin R. Beeaff, S. Ramousse, and Peter V. Hendriksen
M. Radovic, E. Lara-Curzio, and G. Nelson
E. Lara-Curzio, M. Radovic, R. M. Trejo, C. Cofer, T. R. Watkins, and K. L. More
Janine Johnson and Jianmin Qu
K. P. Recknagle, D. T. Jarboe, K. I. Johnson, V. Korolev, M. A. Khaleel, and P. Singh
Yan Ji, J. N. Chung, and Kun Yuan
Subject Areas: Mechanical engineering & materials [TG]
