Freshly Printed - allow 7 days lead
Couldn't load pickup availability
Advanced Processing and Manufacturing Technologiesfor Structural and Multifunctional Materials VI, Volume 33, Issue 8
Tatsuki Ohji (Edited by), . Ohji (Author), Mrityunjay Singh (Edited by), Michael Halbig (Volume editor), Sanjay Mathur (Volume editor)
9781118205983, Wiley
Hardback, published 8 January 2013
182 pages
24.1 x 16 x 1.6 cm, 0.399 kg
The 6th International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials and Systems was held in January 2012 during the 36th International Conference and Exposition on Advanced Ceramics and Composites. This symposium examined progress resulting from the research and development of advanced processing and manufacturing technologies for a wide variety of non-oxide and oxide-based structural ceramics, particulate and fiber-reinforced composites, and multifunctional materials. This issue features seventeen of those papers, representing some of the most important developments in processing and manufacturing technologies.
Preface vii Introduction ix Contribution to the Understanding of the Microstructure of First Generation Si-C-O Fibers 1 The Control of Interphases in Carbon and Ceramic Matrix Composites 11 High Volume Production for High Performance Ceramics 25 Low Pressure Injection Molding of Advanced Ceramic Components with Complex Shapes for Mass Production 35 Ceramic Injection Molding Using a Partially Water-Soluble Binder System: Effect of Back-Bone Polymers on the Process 53 Green-Conscious Ceramic Injection Molding 63 Shaping of Large-Sized Sputtering Targets 73 TEM Observation of the Ti Interlayer between SiC Substrates during Diffusion Bonding 81 Joining of Alumina by Using of Polymer Blend and Aluminum 91 Diffusion Bonding of Rigid Alumina Pieces using Porous Alumina Interlayers 99 Influence of Joining Pressure and Surface Roughness on Flexural Strength of Joined Boron Carbide Ceramics 105 Laser Machining of Melt Infiltrated Ceramic Matrix Composite 113 Fabrication of Dendritic Electrodes for Solid Oxide Fuel Cells by using Micro Stereolithography 123 Ion-Exchange Properties of Nano Zeolite a Prepared by Bead Milling and Post-Milling Recrystallization Method 129 The Role of Milling Liquids in Processing of Metal-Ceramic-Precursor Powders 135 Quantitative Validation of a Multi-Scale Model of Pyrocarbon Chemical Vapor Infiltration from Propane 147 Numerical Analysis of Fracture Behavior in Anisotropic Microstructures 159 Author Index 169
Francis Teyssandier, Geraldine Puyoo, Stephane Mazerat, Georges Chollon, Rene Pailler, and Florence Babonneau
Gerard Vignoles, Rene Pailler, and Francis Teyssandier
William J. Walker, Jr.
Eugene Medvedovski and Michael Peltsman
Oxana Weber and Thomas Hanemann
Oxana Weber and Thomas Hanemann
Alfred Kaiser
H. Tsuda, S. Mori, M. C. Halbig, and M. Singh
Ken'ichiro Kita, Naoki Kondo, Hideki Kita, and Yasuhisa Izutsu
Hiroyuki Miyazaki, Mikinori Hotta and Hideki Kita, and Yasuhisa Izutsu
Kiyoto Sekine, Takeshi Kumazawa, Wu-Bian Tian, Hideki Hyuga, and Hideki Kita
D. C. Jarmon, G. Ojard, and D. Brewer
Naoki Komori, Satoko Tasaki, and Soshu Kirihara
Toru Wakihara, Ryuma Ichikawa.Junichi Tatami, Katsutoshi Komeya, Takeshi Meguro
Nadja Holstein, Katharina Wiegandt, Florian Holleyn, Jochen Kriegesmann, Michael R. Kunze, Joachim Scholz, and Rolf Janssen
G. L. Vignoles, W. Ros, G. Chollon, F. Langlais, and C. Germain
Hisashi Serizawa, Seigo Tomiyama, Tsuyoshi Hajima, and Hidekazu Murakawa
Subject Areas: Mechanical engineering & materials [TG]
