Freshly Printed - allow 7 days lead
Couldn't load pickup availability
Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials II, Volume 36, Issue 6
Tatsuki Ohji (Edited by), Mrityunjay Singh (Edited by), Michael Halbig (Edited by), Jingyang Wang (Volume editor), Soshu Kirihara (Volume editor)
9781119211655, Wiley
Hardback, published 16 February 2016
192 pages
24.1 x 16 x 1.8 cm, 0.454 kg
The Ceramic Engineering and Science Proceeding has been published by The American Ceramic Society since 1980. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.
Preface ix Introduction xi ADVANCED PROCESSING AND MANUFACTURING Development of High Temperature Joining and Thermomechanical Characterization Approaches for SiC/SiC Composites 3 Microstructural Observation of Interfaces in Diffusion Bonded Silicon Carbide Ceramics by TEM 13 Preparation and Characterization of Rb-SiC Ceramics Fabricated from Phenolic Resin/SiC 21 New Combined Method of MPS and FEM for Simulating Friction Stir Processing 27 Novel Visualizing Technique of the Tips of the Cracks for Indentation Fracture Resistance Method 37 Slip-Casting by Water-Absorbing Resin Mold Enables Crack-Free Ceramic Molding System and Products with Partially Different Thicknesses 45 Influence of Lanthanoid Dopant and N/O Substitution on the Electronic Structure and Luminescent Properties of Lanthanum Silicon Oxynitride Phosphors 55 Effect of Ti3SiC2 Particulates on the Mechanical and Tribological Behavior of Sn Matrix Composites 65 Field Assisted Sintering of Silicate Glass-Containing Alumina 75 Modeling the First Activation Stages of the Fe(hfa)2TMEDA CVD Precursor on a Heated Growth Surface 83 Development of High Aspect Ratio Hexagonal Boron Nitride Filler by Mechanical Exfoliation 91 Preparation and Characterization of Nanostructured Films: Study of Hydrophobicity and Antibacterial Properties for Surface Protection 101 ADDITIVE MANUFACTURING AND 3D PRINTING 3-D Printing and Characterization of Polymer Composites with Different Reinforcements 115 Additive Manufacturing of Drainage Segments for Cooling System of Crucible Melting Furnaces 123 Additive Manufacturing of Silicon Carbide-Based Ceramics by 3-D Printing Technologies 133 Additive Manufacturing of Light Weight Ceramic Matrix Composites for Gas Turbine Engine Applications 145 Application of Selective Separation Sintering in Ceramics 3D Printing 151 Contour Crafting of Advanced Ceramic Materials 159 Author Index 169
Michael C. Halbig, Mrityunjay Singh, and Jerry Lang
Hiroshi Tsuda, Shigeo Mori, Michael C. Halbig, Mrityunjay Singh, and Rajiv Asthana
Akihiro Shimamura, Mikinori Hotta, Tatsuki Ohji, and Naoki Kondo
Hisashi Serizawa and Fumikazu Miyasaka
H. Miyazaki and Y. Yoshizawa
Akio Matsumoto
I.A.M. Ibrahim, Z. Len éš, L. Benco, and P. Šajgalík
T. Hammann, R. Johnson, M. F. Riyad, and S. Gupta
Mattia Biesuz and Vincenzo M. Sglavo
Gloria Tabacchi, Ettore Fois, Davide Barreca, Giorgio Carraro, Alberto Gasparotto, and Chiara Maccato
Yuichi Tominaga, Kimiyasu Sato, Daisuke Shimamoto, Yusuke Imai, and Yuji Hotta
M. Barberio, S. Veltri, E. Sokullu, F. Xu, M.A. Gauthier, and P. Antici
Anton Salem, Mrityunjay Singh, and Michael C. Halbig
Miranda Fateri, Andreas Gebhardt, and Georg Renftle
Shirley X. Zhu, Michael C. Halbig, and Mrityunjay Singh
Mrityunjay Singh, Michael C. Halbig, and Joseph E. Grady
J. Zhang and B. Khoshnevis
Mahmood Shirooyeh, Mohammadaref Vali, David Shackleford, Payman Torabi, Paul W. Rehrig, Oh-Hun Kwon, and Behrokh Khoshnevis
Subject Areas: Mechanical engineering & materials [TG]
