Freshly Printed - allow 7 days lead
Couldn't load pickup availability
Advanced Materials for Sustainable Developments, Volume 31, Issue 9
Hua-Tay Lin (Edited by), HT Lin (Author), Andrew Gyekenyesi (Edited by), Linan An (Edited by), Sanjay Mathur (Volume editor), Tatsuki Ohji (Volume editor)
9780470594742, Wiley
Hardback, published 2 November 2010
152 pages
23.9 x 16.3 x 1.8 cm, 0.386 kg
"The current volume represents 15 contributions from the above listed symposia that embody the latest developments in engineering ceramics for energy technologies, thermal management utilizing either highly conductive or insulating materials, as well as advances regarding the utilization of ceramics for sensors." (PR-Inside.com, 28 February 2011)
Contributions from three symposia that were part of the 34th International Conference on Advanced Ceramics and Composites (ICACC), inDaytona Beach,FL, January 24-29, 2010 are presented in this volume. The broad range of topics is captured by the symposia titles, which are listed as follows: International Symposium on Ceramics for Electric Energy Generation, Storage, and Distribution (debuted in 2010); Thermal Management Materials and Technologies (debuted in 2010); and lastly, and Advanced Sensor Technology, Developments and Applications (debuted in 2010). These new symposia emerged during this ICACC meeting due to community growth and interest, and thus each of these subject areas were established as stand-alone symposia. The current volume represents 15 contributions from the above listed symposia that embody the latest developments in engineering ceramics for energy technologies, thermal management utilizing either highly conductive or insulating materials, as well as advances regarding the utilization of ceramics for sensors.
Preface vii Introduction ix Dye-Sensitized Solar Cell Based on Anodic Ti02 Nanotubes Produced from Anodization in Fluoride-Free Electrolyte 1 Self-Propagating High-Temperature Synthesis of Calcium Cobaltate Thermoelectric Powders 15 Processing of Titania Nanoceramics Via Conventional Sintering, Two-Step Sintering and Two-Step Sintering Assisted by Phase Transformation 41 Strength of N- and P-Type Skutterudites 49 Graphite and Ceramic Coated Particles for the HTR 61 Development and Characterization of High Conductivity Graphite Foams for Thermal Management Applications 75 Integration of Graphite Foams to Titanium for Thermal Management Applications 83 Fabrication of Novel Heat Insulator using Porous Ceramics Materials 91 Detection and Classification of Gaseous Compounds by Solid Electrolyte Cyclic Voltammetry Sensors 99 Wireless Chemical Sensor for Combustion Species at High Temperatures using 4H-SÍC 109 High Temperature Acoustic Wave Gas Sensor using Langasite Crystal Resonator 119 Synthesis of (La,Nd):Y203 and (La,Yb):Y203 Laser Ceramics and Their Optical Properties 125 Metal Oxide Nanoelectrodes for Environmental Sensors—ZnO Rods and Particulate Films 131 Author Index 139
Narges F. Fahim and Tohru Sekino
Sidney Lin, Jiri Selig, Dan F. Smith, Hua-Tay Lin, and Hsin Wang
Effect of Rare-Earth Doping on Thermoelectric Properties of Porous SiC Synthesized by Silicon Carbonization Technique 25
Yusuke Yamamoto, Hiroshi Mabuchi, and Toshiyuki Matsui
Powder Synthesis, Characterization and Sintering Behavior of Lithium Titanate 33
Srinivasan Ramanathan
Zohreh Razavi Hesabi and Mehdi Mazaheri
A. A. Wereszczak, M. E. Ragan, K. T. Strong, Jr., P. J. Ritt, H. Wang, J. R. Salvador, and J. Yang
Heinz Nabielek and Mark Mitchell
A. L. Gyekenyesi, M. Singh, C. E. Smith, P. G. Stansberry, M. K. Alam, and D. L. Vrable
M. Singh, Rajiv Asthana, C. E. Smith, and A. L. Gyekenyesi
Kazuma Kugimiya, Mitsue Ogawa, and Hideaki Matsubara
Grzegorz Jasinski
Geunsik Lim and Aravinda Kar
Hongbin Cheng, Lifeng Qin, and Qing-Ming Wang
Yihua Huang and Dongliang Jiang
Yoshitake Masuda, Dewei Chu, Xiulan Hu, Tatsuki Ohji, Kazumi Kato, Masako Ajimi, Makoto Bekki, and Shuji Sonezaki
Subject Areas: Mechanical engineering & materials [TG]
