Freshly Printed - allow 7 days lead
Couldn't load pickup availability
78th Conference on Glass Problems
S. K. Sundaram (Edited by), SK Sundaram (Author)
9781119519645, Wiley
Hardback, published 5 April 2019
284 pages
1 x 1 x 1 cm, 0.454 kg
The 78th Glass Problem Conference (GPC) including the 11th Advances in Fusion and Processing of Glass (AFPG) Symposium is organized by the Kazuo Inamori School of Engineering, The New York State College of Ceramics, Alfred University, Alfred, NY 14802 and The Glass Manufacturing Industry Council (GMIC), Westerville, OH 43082. The Program Director was S. K. Sundaram, Inamori Professor of Materials Science and Engineering, Kazuo Inamori School of Engineering, The New York State College of Ceramics, Alfred University, Alfred, NY 14802. The Conference Director was Robert Weisenburger Lipetz, Executive Director, Glass Manufacturing Industry Council (GMIC), Westerville, OH 43082. Donna Banks of the GMIC coordinated the events and provided support. The Conference started with a half-day plenary session followed by technical sessions. The themes and chairs of four half-day technical sessions were as follows: Modeling, Sensors, and Furnace Design Refractories & Testing Environmental & Safety
James Uhlik, Toledo Engineering Company, Inc., Toledo, OH and Michelle Korwin-Edson, Owen Corning Composite Solutions, Granville, OH
Laura Lowe – North American Refractory Company, Pittsburgh, PA, Larry McCloskey – Anchor Acquisition, LLC, Lancaster, OH, and Laura Lowe – North American Refractory Company, Pittsburgh, PA and Larry McCloskey – Anchor Acquisition, LLC, Lancaster, OH
Combustion
Glenn Neff, Glass Service USA, Inc., Stuart, FL and Uyi Iyoha, Praxair Inc., Tonawanda, NY
Phil Tucker, Johns Manville, Denver, CO and Elmer Sperry, Libbey Glass, Toledo, OH
Foreword ix Preface xi Acknowledgments xiii 78th GLASS PROBLEMS CONFERENCE Optimization of Regenerator Design 5 Glass Defects Identification using a Mass Spectrometer, SEMEDX Microanalysis and HTO Analysis 13 A New Radiometric Measurement Device for the Temperature of Ribbon Zones in Tin Bath and Lehrs 29 Furnace Design and Equipment for Extended Furnace Life 39 Use of Continuous Infrared Temperature Image to Optimize Furnace Operations 4 Refractories & Testing Acceptance Test of Fused Cast AZS Sidewall Blocks using Ground Penetrating Radar 59 New Industry Standard in Furnace Inspection 75 Combustion Design and Implementation of OPTIMELT™ Heat Recovery for an Oxy-Fuel Furnace at Libbey Leerdam 89 Maintaining Full Production in Furnaces with Failing Regenerators using Oxy-Fuel Combustion 99 Heat-Oxy-Combustion Bi-Fuel Burner - Heavy Fuel Oil Trials 111 Environmental & Safety Glass Furnace Catalytic Ceramic Filter Installation and Operation Experience 123 Glassil Dustshield™: A Materials Engineering Solution to Meet OSHA’S New Respirable Silica Regulations 157 Deadly Dust: Reducing the Risks of Silica Dust in Glass Working Operations 165 New Approach to Safety Estimation of Heat Soak Tested Thermally Toughened Safety Glass 169 ADVANCES IN FUSION AND PROCESSING OF GLASS SYMPOSIUM Design of SLS Compositions for Accelerated Chemical Strengthening Warp Reduction in Thin Chemically Strengthened Float Glasses 191 Research and Development of New Energy-Saving, Environmentally Friendly Fiber Glass Technology 201 The Relation between Furnace Efficiency and the Physics and Chemistry of the Melting Process 221 Gyrotron Based Melting 233 How the Industrial Revolution 4.0 Will Impact the Glass Industry Image Analysis that is Part of ES 4.0 is a Key Component towards Industry 4.0 247 Modification of the Glass Surface during Manufacturing 263
Modeling, Sensors, and Furnace Design
Oscar Verheijen, Luuk Thielen, Goetz Heilemann, and Elias Carrillo
Martina Jezikova, Filip Janos, Jiri Ullrich, and Erik Muijsenberg
Wolf Kuhn
Christoph Jatzauk
Neil G. Simpson, Mark Bennett, and S. Fiona Turner
Dan Swiler and Daniel Ragland
Yakup Bayram, Jon Wechsel, and Elmer Sperry
M. van Valburg and E. Sperry, S. Laux, R. Bell, A. Francis, and H. Kobayashi
William J. Horan
S. Juma, X. Paubel, T. Kang, and L. Jarry
Weijian Chen and Martin Schroter
Greg Bedford, Ashley Rich, Emma Hansen, and John Jackson
Greg Carmichael
Andreas M. Kasper
William C. LaCourse
Arun K. Varshneya
Hong Li
Reinhard Conradt
Paul P. Woskov
Erick Muijsenberg
J.W. McCamy, A. Ganjoo, and C-H Hung
Subject Areas: Mechanical engineering & materials [TG]
